Initial commit

etc/logrotate.d/mysql-server

@@ -0,0 +1,20 @@
+# - I put everything in one block and added sharedscripts, so that mysql gets
+#   flush-logs'd only once.
+#   Else the binary logs would automatically increase by n times every day.
+# - The error log is obsolete, messages go to syslog now.
+/var/log/mysql/mysql.log /var/log/mysql/mysql-slow.log /var/log/mysql/mariadb-slow.log /var/log/mysql/error.log {
+	daily
+	rotate 2
+	missingok
+	create 640 mysql adm
+	compress
+	sharedscripts
+	postrotate
+          test -x /usr/bin/mysqladmin || exit 0
+          if [ -f `my_print_defaults --mysqld | grep -m 1 -oP "pid-file=\K.+$"` ]; then
+            # If this fails, check debian.conf!
+            mysqladmin --defaults-file=/etc/mysql/debian.cnf --local flush-error-log \
+              flush-engine-log flush-general-log flush-slow-log
+          fi
+	endscript
+}

etc/logrotate.d/nginx

@@ -0,0 +1,18 @@
+/var/log/nginx/*.log {
+	daily
+	missingok
+	rotate 1
+	nocompress
+	delaycompress
+	notifempty
+	create 0640 www-data www-data
+	sharedscripts
+	prerotate
+		if [ -d /etc/logrotate.d/httpd-prerotate ]; then \
+			run-parts /etc/logrotate.d/httpd-prerotate; \
+		fi \
+	endscript
+	postrotate
+		invoke-rc.d nginx rotate >/dev/null 2>&1
+	endscript
+}

etc/logrotate.d/php7.0-fpm

@@ -0,0 +1,11 @@
+/var/log/php7.0-fpm*.log {
+	rotate 1
+	daily
+	missingok
+	notifempty
+	compress
+	delaycompress
+	postrotate
+		/usr/lib/php/php7.0-fpm-reopenlogs
+	endscript
+}

etc/logrotate.d/php7.1-fpm

@@ -0,0 +1,11 @@
+/var/log/php7.1-fpm*.log {
+	rotate 1
+	daily
+	missingok
+	notifempty
+	compress
+	delaycompress
+	postrotate
+		/usr/lib/php/php7.1-fpm-reopenlogs
+	endscript
+}

etc/logrotate.d/tor

@@ -0,0 +1,15 @@
+/var/log/tor/*log {
+	daily
+	rotate 2
+	compress
+	delaycompress
+	missingok
+	notifempty
+	create 0640 debian-tor adm
+	sharedscripts
+	postrotate
+		if service tor status > /dev/null; then
+			service tor reload > /dev/null
+		fi
+	endscript
+}

etc/logrotate.d/vsftpd

@@ -0,0 +1,10 @@
+/var/log/vsftpd.log
+{
+	create 640 root adm
+
+	# ftpd doesn't handle SIGHUP properly
+	missingok
+	notifempty
+	rotate 1
+	daily
+}

etc/mysql/conf.d/manual_settings.cnf

@@ -0,0 +1,20 @@
+[mysqld]
+innodb_buffer_pool_size=1G
+innodb_buffer_pool_instances=1
+#myisam_sort_buffer_size=200K
+#bulk_insert_buffer_size=1M
+#sort_buffer_size=1M
+innodb_log_buffer_size=8M
+innodb_log_file_size=64M
+innodb_flush_log_at_trx_commit=2
+#innodb-defragment=1
+skip-name-resolve=1
+query_cache_size=128M
+query_cache_limit=4M
+max_connections=500
+table_open_cache=5000
+tmp_table_size=16M
+max_heap_table_size=16M
+join_buffer_size=4M
+aria_pagecache_buffer_size=8M
+aria_sort_buffer_size=8M

etc/nginx/fastcgi.conf

@@ -0,0 +1,26 @@
+
+fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
+fastcgi_param  QUERY_STRING       $query_string;
+fastcgi_param  REQUEST_METHOD     $request_method;
+fastcgi_param  CONTENT_TYPE       $content_type;
+fastcgi_param  CONTENT_LENGTH     $content_length;
+
+fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
+fastcgi_param  REQUEST_URI        $request_uri;
+fastcgi_param  DOCUMENT_URI       $document_uri;
+fastcgi_param  DOCUMENT_ROOT      $document_root;
+fastcgi_param  SERVER_PROTOCOL    $server_protocol;
+fastcgi_param  REQUEST_SCHEME     $scheme;
+fastcgi_param  HTTPS              $https if_not_empty;
+
+fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
+fastcgi_param  SERVER_SOFTWARE    nginx;
+
+fastcgi_param  REMOTE_ADDR        $remote_addr;
+fastcgi_param  REMOTE_PORT        $remote_port;
+fastcgi_param  SERVER_ADDR        $server_addr;
+fastcgi_param  SERVER_PORT        $server_port;
+fastcgi_param  SERVER_NAME        $server_name;
+
+# PHP only, required if PHP was built with --enable-force-cgi-redirect
+fastcgi_param  REDIRECT_STATUS    200;

etc/nginx/nginx.conf

@@ -0,0 +1,68 @@
+user www-data;
+worker_processes auto;
+pid /run/nginx.pid;
+include /etc/nginx/modules-enabled/*.conf;
+pcre_jit on;
+worker_rlimit_nofile 30000;
+
+events {
+	worker_connections 768;
+	multi_accept on;
+}
+
+http {
+
+	##
+	# Basic Settings
+	##
+
+	sendfile on;
+	tcp_nopush on;
+	tcp_nodelay on;
+	keepalive_timeout 65;
+	types_hash_max_size 2048;
+	server_tokens off;
+        client_max_body_size 105M;
+	proxy_http_version 1.1;
+	#proxy_buffering off;
+
+	client_body_timeout 10s;
+	client_header_timeout 10s;
+
+	server_names_hash_bucket_size 32768;
+	server_names_hash_max_size 1024;
+	server_name_in_redirect off;
+	port_in_redirect off;
+        charset UTF-8;
+	index index.html index.htm index.php index.hosting.html;
+
+	include /etc/nginx/mime.types;
+	default_type application/octet-stream;
+
+	##
+	# Logging Settings
+	##
+        log_format custom '[$time_iso8601] $status $bytes_sent "$request_method $request_uri" "$http_referer" "$http_user_agent"';
+	access_log /var/log/nginx/access.log custom;
+	error_log /var/log/nginx/error.log notice;
+        log_not_found off;
+
+	##
+	# Gzip Settings
+	##
+
+	gzip on;
+	gzip_disable "msie6";
+
+	# gzip_vary on;
+	gzip_proxied any;
+	gzip_comp_level 9;
+	# gzip_buffers 16 8k;
+	# gzip_http_version 1.1;
+	gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript;
+
+	##
+	# Virtual Host Configs
+	##
+	include /etc/nginx/sites-enabled/*;
+}

etc/nginx/sites-enabled/default

@@ -0,0 +1,36 @@
+server {
+	listen 80 default_server;
+	root /var/www/html;
+	index index.php;
+	server_name dhosting4okcs22v.onion;
+	location / {
+		try_files $uri $uri/ =404;
+	}
+	location ~ \.php$ {
+		include snippets/fastcgi-php.conf;
+		fastcgi_pass unix:/var/run/php/php7.1-fpm.sock;
+	}
+	location /squirrelmail {
+		location ~ \.php$ {
+			include snippets/fastcgi-php.conf;
+			fastcgi_pass unix:/var/run/php/php7.0-fpm.sock;
+		}
+	}
+	location /phpmyadmin {
+		root /usr/share;
+		location ~ \.php$ {
+			include snippets/fastcgi-php.conf;
+			fastcgi_pass unix:/run/php/php7.1-fpm.sock;
+		}
+	}
+	location /adminer {
+		root /usr/share/adminer;
+		location ~ \.php$ {
+			include snippets/fastcgi-php.conf;
+			fastcgi_pass unix:/run/php/php7.1-fpm.sock;
+		}
+	}
+	location /externals/jush/ {
+		root /usr/share/adminer;
+	}
+}

etc/nginx/snippets/fastcgi-php.conf

@@ -0,0 +1,19 @@
+# regex to split $uri to $fastcgi_script_name and $fastcgi_path
+fastcgi_split_path_info ^(.+\.php)(/.+)$;
+
+# Check that the PHP script exists before passing it
+try_files $fastcgi_script_name =404;
+
+# Bypass the fact that try_files resets $fastcgi_path_info
+# see: http://trac.nginx.org/nginx/ticket/321
+set $path_info $fastcgi_path_info;
+fastcgi_param PATH_INFO $path_info;
+
+fastcgi_index index.php;
+include fastcgi.conf;
+
+fastcgi_read_timeout 600s;
+fastcgi_max_temp_file_size 0;
+fastcgi_buffer_size 4K;
+fastcgi_buffers 64 4k;
+

etc/pam.d/vsftpd

@@ -0,0 +1,10 @@
+# Standard behaviour for ftpd(8).
+auth	required	pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed
+
+# Note: vsftpd handles anonymous logins on its own. Do not enable pam_ftp.so.
+
+# Standard pam includes
+@include common-account
+@include common-session
+@include common-auth
+#auth	required	pam_shells.so

etc/php/7.0/fpm/php-fpm-2.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-2.pid
+error_log = /var/log/php7.0-fpm-2.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/2/*.conf

etc/php/7.0/fpm/php-fpm-3.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-3.pid
+error_log = /var/log/php7.0-fpm-3.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/3/*.conf

etc/php/7.0/fpm/php-fpm-4.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-4.pid
+error_log = /var/log/php7.0-fpm-4.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/4/*.conf

etc/php/7.0/fpm/php-fpm-5.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-5.pid
+error_log = /var/log/php7.0-fpm-5.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/5/*.conf

etc/php/7.0/fpm/php-fpm-6.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-6.pid
+error_log = /var/log/php7.0-fpm-6.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/6/*.conf

etc/php/7.0/fpm/php-fpm-7.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-7.pid
+error_log = /var/log/php7.0-fpm-7.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/7/*.conf

etc/php/7.0/fpm/php-fpm-a.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-a.pid
+error_log = /var/log/php7.0-fpm-a.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/a/*.conf

etc/php/7.0/fpm/php-fpm-b.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-b.pid
+error_log = /var/log/php7.0-fpm-b.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/b/*.conf

etc/php/7.0/fpm/php-fpm-c.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-c.pid
+error_log = /var/log/php7.0-fpm-c.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/c/*.conf

etc/php/7.0/fpm/php-fpm-d.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-d.pid
+error_log = /var/log/php7.0-fpm-d.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/d/*.conf

etc/php/7.0/fpm/php-fpm-e.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-e.pid
+error_log = /var/log/php7.0-fpm-e.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/e/*.conf

etc/php/7.0/fpm/php-fpm-f.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-f.pid
+error_log = /var/log/php7.0-fpm-f.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/f/*.conf

etc/php/7.0/fpm/php-fpm-g.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-g.pid
+error_log = /var/log/php7.0-fpm-g.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/g/*.conf

etc/php/7.0/fpm/php-fpm-h.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-h.pid
+error_log = /var/log/php7.0-fpm-h.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/h/*.conf

etc/php/7.0/fpm/php-fpm-i.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-i.pid
+error_log = /var/log/php7.0-fpm-i.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/i/*.conf

etc/php/7.0/fpm/php-fpm-j.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-j.pid
+error_log = /var/log/php7.0-fpm-j.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/j/*.conf

etc/php/7.0/fpm/php-fpm-k.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-k.pid
+error_log = /var/log/php7.0-fpm-k.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/k/*.conf

etc/php/7.0/fpm/php-fpm-l.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-l.pid
+error_log = /var/log/php7.0-fpm-l.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/l/*.conf

etc/php/7.0/fpm/php-fpm-m.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-m.pid
+error_log = /var/log/php7.0-fpm-m.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/m/*.conf

etc/php/7.0/fpm/php-fpm-n.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-n.pid
+error_log = /var/log/php7.0-fpm-n.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/n/*.conf

etc/php/7.0/fpm/php-fpm-o.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-o.pid
+error_log = /var/log/php7.0-fpm-o.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/o/*.conf

etc/php/7.0/fpm/php-fpm-p.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-p.pid
+error_log = /var/log/php7.0-fpm-p.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/p/*.conf

etc/php/7.0/fpm/php-fpm-q.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-q.pid
+error_log = /var/log/php7.0-fpm-q.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/q/*.conf

etc/php/7.0/fpm/php-fpm-r.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-r.pid
+error_log = /var/log/php7.0-fpm-r.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/r/*.conf

etc/php/7.0/fpm/php-fpm-s.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-s.pid
+error_log = /var/log/php7.0-fpm-s.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/s/*.conf

etc/php/7.0/fpm/php-fpm-t.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-t.pid
+error_log = /var/log/php7.0-fpm-t.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/t/*.conf

etc/php/7.0/fpm/php-fpm-u.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-u.pid
+error_log = /var/log/php7.0-fpm-u.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/u/*.conf

etc/php/7.0/fpm/php-fpm-v.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-v.pid
+error_log = /var/log/php7.0-fpm-v.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/v/*.conf

etc/php/7.0/fpm/php-fpm-w.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-w.pid
+error_log = /var/log/php7.0-fpm-w.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/w/*.conf

etc/php/7.0/fpm/php-fpm-x.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-x.pid
+error_log = /var/log/php7.0-fpm-x.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/x/*.conf

etc/php/7.0/fpm/php-fpm-y.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-y.pid
+error_log = /var/log/php7.0-fpm-y.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/y/*.conf

etc/php/7.0/fpm/php-fpm-z.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.0-fpm-z.pid
+error_log = /var/log/php7.0-fpm-z.log
+process_control_timeout = 10
+include=/etc/php/7.0/fpm/pool.d/z/*.conf

etc/php/7.0/fpm/php-fpm.conf

@@ -0,0 +1,125 @@
+;;;;;;;;;;;;;;;;;;;;;
+; FPM Configuration ;
+;;;;;;;;;;;;;;;;;;;;;
+
+; All relative paths in this configuration file are relative to PHP's install
+; prefix (/usr). This prefix can be dynamically changed by using the
+; '-p' argument from the command line.
+
+;;;;;;;;;;;;;;;;;;
+; Global Options ;
+;;;;;;;;;;;;;;;;;;
+
+[global]
+; Pid file
+; Note: the default prefix is /var
+; Default Value: none
+pid = /run/php/php7.0-fpm.pid
+
+; Error log file
+; If it's set to "syslog", log is sent to syslogd instead of being written
+; in a local file.
+; Note: the default prefix is /var
+; Default Value: log/php-fpm.log
+error_log = /var/log/php7.0-fpm.log
+
+; syslog_facility is used to specify what type of program is logging the
+; message. This lets syslogd specify that messages from different facilities
+; will be handled differently.
+; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
+; Default Value: daemon
+;syslog.facility = daemon
+
+; syslog_ident is prepended to every message. If you have multiple FPM
+; instances running on the same server, you can change the default value
+; which must suit common needs.
+; Default Value: php-fpm
+;syslog.ident = php-fpm
+
+; Log level
+; Possible Values: alert, error, warning, notice, debug
+; Default Value: notice
+;log_level = notice
+
+; If this number of child processes exit with SIGSEGV or SIGBUS within the time
+; interval set by emergency_restart_interval then FPM will restart. A value
+; of '0' means 'Off'.
+; Default Value: 0
+;emergency_restart_threshold = 0
+
+; Interval of time used by emergency_restart_interval to determine when
+; a graceful restart will be initiated.  This can be useful to work around
+; accidental corruptions in an accelerator's shared memory.
+; Available Units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+;emergency_restart_interval = 0
+
+; Time limit for child processes to wait for a reaction on signals from master.
+; Available units: s(econds), m(inutes), h(ours), or d(ays)
+; Default Unit: seconds
+; Default Value: 0
+process_control_timeout = 10
+
+; The maximum number of processes FPM will fork. This has been design to control
+; the global number of processes when using dynamic PM within a lot of pools.
+; Use it with caution.
+; Note: A value of 0 indicates no limit
+; Default Value: 0
+; process.max = 128
+
+; Specify the nice(2) priority to apply to the master process (only if set)
+; The value can vary from -19 (highest priority) to 20 (lower priority)
+; Note: - It will only work if the FPM master process is launched as root
+;       - The pool process will inherit the master process priority
+;         unless it specified otherwise
+; Default Value: no set
+; process.priority = -19
+
+; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
+; Default Value: yes
+;daemonize = yes
+
+; Set open file descriptor rlimit for the master process.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit for the master process.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Specify the event mechanism FPM will use. The following is available:
+; - select     (any POSIX os)
+; - poll       (any POSIX os)
+; - epoll      (linux >= 2.5.44)
+; - kqueue     (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
+; - /dev/poll  (Solaris >= 7)
+; - port       (Solaris >= 10)
+; Default Value: not set (auto detection)
+;events.mechanism = epoll
+
+; When FPM is build with systemd integration, specify the interval,
+; in second, between health report notification to systemd.
+; Set to 0 to disable.
+; Available Units: s(econds), m(inutes), h(ours)
+; Default Unit: seconds
+; Default value: 10
+;systemd_interval = 10
+
+;;;;;;;;;;;;;;;;;;;;
+; Pool Definitions ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Multiple pools of child processes may be started with different listening
+; ports and different management options.  The name of the pool will be
+; used in logs and stats. There is no limitation on the number of pools which
+; FPM can handle. Your system will tell you anyway :)
+
+; Include one or more files. If glob(3) exists, it is used to include a bunch of
+; files from a glob(3) pattern. This directive can be used everywhere in the
+; file.
+; Relative path can also be used. They will be prefixed by:
+;  - the global prefix if it's been set (-p argument)
+;  - /usr otherwise
+include=/etc/php/7.0/fpm/pool.d/*.conf

etc/php/7.0/fpm/pool.d/2/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/2
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/3/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/3
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/4/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/4
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/5/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/5
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/6/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/6
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/7/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/7
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/a/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/a
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/b/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/b
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/c/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/c
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/d/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/d
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/e/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/e
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/f/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/f
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/g/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/g
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/h/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/h
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/i/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/i
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/j/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/j
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/k/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/k
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/l/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/l
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/m/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/m
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/n/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/n
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/o/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/o
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/p/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/p
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/q/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/q
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/r/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/r
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/s/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/s
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/t/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/t
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/u/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/u
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/v/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/v
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/w/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/w
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/www.conf

@@ -0,0 +1,415 @@
+; Start a new pool named 'www'.
+; the variable $pool can be used in any directive and will be replaced by the
+; pool name ('www' here)
+[www]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'access.log'
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or /usr) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+;       will be used.
+user = www-data
+group = www-data
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
+;                            a specific port;
+;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses
+;                            (IPv6 and IPv4-mapped) on a specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = /run/php/php7.0-fpm.sock
+
+; Set listen(2) backlog.
+; Default Value: 511 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = 511
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions.
+; Default Values: user and group are set as the running user
+;                 mode is set to 0660
+listen.owner = www-data
+listen.group = www-data
+;listen.mode = 0660
+; When POSIX Access Control Lists are supported you can set them using
+; these options, value is a comma separated list of user/group names.
+; When set, listen.owner and listen.group are ignored
+;listen.acl_users =
+;listen.acl_groups =
+
+; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+;listen.allowed_clients = 127.0.0.1
+
+; Specify the nice(2) priority to apply to the pool processes (only if set)
+; The value can vary from -19 (highest priority) to 20 (lower priority)
+; Note: - It will only work if the FPM master process is launched as root
+;       - The pool processes will inherit the master process priority
+;         unless it specified otherwise
+; Default Value: no set
+; process.priority = -19
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+;   static  - a fixed number (pm.max_children) of child processes;
+;   dynamic - the number of child processes are set dynamically based on the
+;             following directives. With this process management, there will be
+;             always at least 1 children.
+;             pm.max_children      - the maximum number of children that can
+;                                    be alive at the same time.
+;             pm.start_servers     - the number of children created on startup.
+;             pm.min_spare_servers - the minimum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is less than this
+;                                    number then some children will be created.
+;             pm.max_spare_servers - the maximum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is greater than this
+;                                    number then some children will be killed.
+;  ondemand - no children are created at startup. Children will be forked when
+;             new requests will connect. The following parameter are used:
+;             pm.max_children           - the maximum number of children that
+;                                         can be alive at the same time.
+;             pm.process_idle_timeout   - The number of seconds after which
+;                                         an idle process will be killed.
+; Note: This value is mandatory.
+pm = ondemand
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI. The below defaults are based on a server without much resources. Don't
+; forget to tweak pm.* to fit your needs.
+; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
+; Note: This value is mandatory.
+pm.max_children = 15
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+pm.start_servers = 2
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 1
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 3
+
+; The number of seconds after which an idle process will be killed.
+; Note: Used only when pm is set to 'ondemand'
+; Default Value: 10s
+;pm.process_idle_timeout = 10s;
+
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. It shows the following informations:
+;   pool                 - the name of the pool;
+;   process manager      - static, dynamic or ondemand;
+;   start time           - the date and time FPM has started;
+;   start since          - number of seconds since FPM has started;
+;   accepted conn        - the number of request accepted by the pool;
+;   listen queue         - the number of request in the queue of pending
+;                          connections (see backlog in listen(2));
+;   max listen queue     - the maximum number of requests in the queue
+;                          of pending connections since FPM has started;
+;   listen queue len     - the size of the socket queue of pending connections;
+;   idle processes       - the number of idle processes;
+;   active processes     - the number of active processes;
+;   total processes      - the number of idle + active processes;
+;   max active processes - the maximum number of active processes since FPM
+;                          has started;
+;   max children reached - number of times, the process limit has been reached,
+;                          when pm tries to start more children (works only for
+;                          pm 'dynamic' and 'ondemand');
+; Value are updated in real time.
+; Example output:
+;   pool:                 www
+;   process manager:      static
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          62636
+;   accepted conn:        190460
+;   listen queue:         0
+;   max listen queue:     1
+;   listen queue len:     42
+;   idle processes:       4
+;   active processes:     11
+;   total processes:      15
+;   max active processes: 12
+;   max children reached: 0
+;
+; By default the status page output is formatted as text/plain. Passing either
+; 'html', 'xml' or 'json' in the query string will return the corresponding
+; output syntax. Example:
+;   http://www.foo.bar/status
+;   http://www.foo.bar/status?json
+;   http://www.foo.bar/status?html
+;   http://www.foo.bar/status?xml
+;
+; By default the status page only outputs short status. Passing 'full' in the
+; query string will also return status for each pool process.
+; Example:
+;   http://www.foo.bar/status?full
+;   http://www.foo.bar/status?json&full
+;   http://www.foo.bar/status?html&full
+;   http://www.foo.bar/status?xml&full
+; The Full status returns for each process:
+;   pid                  - the PID of the process;
+;   state                - the state of the process (Idle, Running, ...);
+;   start time           - the date and time the process has started;
+;   start since          - the number of seconds since the process has started;
+;   requests             - the number of requests the process has served;
+;   request duration     - the duration in µs of the requests;
+;   request method       - the request method (GET, POST, ...);
+;   request URI          - the request URI with the query string;
+;   content length       - the content length of the request (only with POST);
+;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
+;   script               - the main script called (or '-' if not set);
+;   last request cpu     - the %cpu the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because CPU calculation is done when the request
+;                          processing has terminated;
+;   last request memory  - the max amount of memory the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because memory calculation is done when the request
+;                          processing has terminated;
+; If the process is in Idle state, then informations are related to the
+; last request the process has served. Otherwise informations are related to
+; the current request being served.
+; Example output:
+;   ************************
+;   pid:                  31330
+;   state:                Running
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          63087
+;   requests:             12808
+;   request duration:     1250261
+;   request method:       GET
+;   request URI:          /test_mem.php?N=10000
+;   content length:       0
+;   user:                 -
+;   script:               /home/fat/web/docs/php/test_mem.php
+;   last request cpu:     0.00
+;   last request memory:  0
+;
+; Note: There is a real-time FPM status monitoring sample web page available
+;       It's available in: /usr/share/php/7.0/fpm/status.html
+;
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may.onionlict with a real PHP file.
+; Default Value: not set
+;pm.status_path = /status
+
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may.onionlict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+
+; The access log file
+; Default: not set
+;access.log = log/$pool.access.log
+
+; The access log format.
+; The following syntax is allowed
+;  %%: the '%' character
+;  %C: %CPU used by the request
+;      it can accept the following format:
+;      - %{user}C for user CPU only
+;      - %{system}C for system CPU only
+;      - %{total}C  for user + system CPU (default)
+;  %d: time taken to serve the request
+;      it can accept the following format:
+;      - %{seconds}d (default)
+;      - %{miliseconds}d
+;      - %{mili}d
+;      - %{microseconds}d
+;      - %{micro}d
+;  %e: an environment variable (same as $_ENV or $_SERVER)
+;      it must be associated with embraces to specify the name of the env
+;      variable. Some exemples:
+;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
+;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
+;  %f: script filename
+;  %l: content-length of the request (for POST request only)
+;  %m: request method
+;  %M: peak of memory allocated by PHP
+;      it can accept the following format:
+;      - %{bytes}M (default)
+;      - %{kilobytes}M
+;      - %{kilo}M
+;      - %{megabytes}M
+;      - %{mega}M
+;  %n: pool name
+;  %o: output header
+;      it must be associated with embraces to specify the name of the header:
+;      - %{Content-Type}o
+;      - %{X-Powered-By}o
+;      - %{Transfert-Encoding}o
+;      - ....
+;  %p: PID of the child that serviced the request
+;  %P: PID of the parent of the child that serviced the request
+;  %q: the query string
+;  %Q: the '?' character if query string exists
+;  %r: the request URI (without the query string, see %q and %Q)
+;  %R: remote IP address
+;  %s: status (response code)
+;  %t: server time the request was received
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
+;  %T: time the log has been written (the request has finished)
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
+;  %u: remote user
+;
+; Default: "%R - %u %t \"%m %r\" %s"
+;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
+
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+;slowlog = log/$pool.log.slow
+
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_slowlog_timeout = 0
+
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever
+;       possible. However, all PHP paths will be relative to the chroot
+;       (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot =
+
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+;chdir = /var/www
+
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environement, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+;catch_workers_output = yes
+
+; Clear environment in FPM workers
+; Prevents arbitrary environment variables from reaching FPM worker processes
+; by clearing the environment in workers before env vars specified in this
+; pool.onioniguration are added.
+; Setting to "no" will make all environment variables available to PHP code
+; via getenv(), $_ENV and $_SERVER.
+; Default Value: yes
+;clear_env = no
+
+; Limits the extensions of the main script FPM will allow to parse. This can
+; prevent.onioniguration mistakes on the web server side. You should only limit
+; FPM to .php extensions to prevent malicious users to use other extensions to
+; exectute php code.
+; Note: set an empty value to allow all extensions.
+; Default Value: .php
+;security.limit_extensions = .php .php3 .php4 .php5 .php7
+
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+;   php_value/php_flag             - you can set classic ini defines which can
+;                                    be overwritten from PHP call 'ini_set'.
+;   php_admin_value/php_admin_flag - these directives won't be overwritten by
+;                                     PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or /usr)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+;                specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M
+php_admin_value[mysqli.allow_persistent] = On
+

etc/php/7.0/fpm/pool.d/x/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/x
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/y/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/y
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.0/fpm/pool.d/z/www.conf

@@ -0,0 +1,8 @@
+[www]
+user = www-data
+group = www-data
+listen = /run/php/z
+listen.owner = www-data
+listen.group = www-data
+pm = ondemand
+pm.max_children = 8

etc/php/7.1/fpm/php-fpm-2.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-2.pid
+error_log = /var/log/php7.1-fpm-2.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/2/*.conf

etc/php/7.1/fpm/php-fpm-3.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-3.pid
+error_log = /var/log/php7.1-fpm-3.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/3/*.conf

etc/php/7.1/fpm/php-fpm-4.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-4.pid
+error_log = /var/log/php7.1-fpm-4.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/4/*.conf

etc/php/7.1/fpm/php-fpm-5.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-5.pid
+error_log = /var/log/php7.1-fpm-5.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/5/*.conf

etc/php/7.1/fpm/php-fpm-6.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-6.pid
+error_log = /var/log/php7.1-fpm-6.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/6/*.conf

etc/php/7.1/fpm/php-fpm-7.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-7.pid
+error_log = /var/log/php7.1-fpm-7.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/7/*.conf

etc/php/7.1/fpm/php-fpm-a.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-a.pid
+error_log = /var/log/php7.1-fpm-a.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/a/*.conf

etc/php/7.1/fpm/php-fpm-b.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-b.pid
+error_log = /var/log/php7.1-fpm-b.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/b/*.conf

etc/php/7.1/fpm/php-fpm-c.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-c.pid
+error_log = /var/log/php7.1-fpm-c.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/c/*.conf

etc/php/7.1/fpm/php-fpm-d.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-d.pid
+error_log = /var/log/php7.1-fpm-d.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/d/*.conf

etc/php/7.1/fpm/php-fpm-e.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-e.pid
+error_log = /var/log/php7.1-fpm-e.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/e/*.conf

etc/php/7.1/fpm/php-fpm-f.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-f.pid
+error_log = /var/log/php7.1-fpm-f.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/f/*.conf

etc/php/7.1/fpm/php-fpm-g.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-g.pid
+error_log = /var/log/php7.1-fpm-g.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/g/*.conf

etc/php/7.1/fpm/php-fpm-h.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-h.pid
+error_log = /var/log/php7.1-fpm-h.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/h/*.conf

etc/php/7.1/fpm/php-fpm-i.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-i.pid
+error_log = /var/log/php7.1-fpm-i.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/i/*.conf

etc/php/7.1/fpm/php-fpm-j.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-j.pid
+error_log = /var/log/php7.1-fpm-j.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/j/*.conf

etc/php/7.1/fpm/php-fpm-k.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-k.pid
+error_log = /var/log/php7.1-fpm-k.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/k/*.conf

etc/php/7.1/fpm/php-fpm-l.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-l.pid
+error_log = /var/log/php7.1-fpm-l.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/l/*.conf

etc/php/7.1/fpm/php-fpm-m.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-m.pid
+error_log = /var/log/php7.1-fpm-m.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/m/*.conf

etc/php/7.1/fpm/php-fpm-n.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-n.pid
+error_log = /var/log/php7.1-fpm-n.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/n/*.conf

etc/php/7.1/fpm/php-fpm-o.conf

@@ -0,0 +1,5 @@
+[global]
+pid = /run/php/php7.1-fpm-o.pid
+error_log = /var/log/php7.1-fpm-o.log
+process_control_timeout = 10
+include=/etc/php/7.1/fpm/pool.d/o/*.conf